Australia
Austria
Belgium (Dutch)
Canada (English)
Denmark
Estonia
Finland
France
Germany
Ireland
Italy
Japan
Luxembourg (French)
Netherlands
New Zealand
Norway
Poland
Portugal
Romania
Singapore
Spain
Sweden
Switzerland (French)
USA
United Kingdom
Other Countries
Recommended for you
- Sorry, we couldn’t find any search results for the search term
How to Remove Our Premium Satin and Premium Matte Wallpapers
Non-woven wallpaper is not only easy to apply, but it’s also simple to remove. All you need to get started is a bucket of lukewarm water, a cloth or sponge, and a wallpaper knife. A metal scraper can also be handy. You may want to add a little dish soap or fabric softener to the water.
Step 1
Locate a seam or edge of the wallpaper and gently peel the wallpaper off the wall. You should be able to remove large sections by pulling carefully.
Step 2
Use a sponge or cloth to dampen the wallpaper that remains on the wall. Allow a few minutes for the moisture to soak in and reactivate the adhesive. This will make peeling or scraping the wallpaper easier.
Step 3
For stubborn wallpaper, lightly score the surface with a utility knife or scoring tool. Then dampen the wallpaper again and continue peeling it away from the wall.
Step 4
If needed, use a metal scraper to help lift and remove any remaining wallpaper. Repeat the dampening and peeling process until the wall is clear. Finally, wipe away any leftover adhesive with a damp cloth.
How to Remove Our Peel and Stick Matte Wallpapers
If you want to take down your Peel and Stick Matte wallpaper, it’s easy to do on your own. It won’t leave any marks or damage the wall, and you don’t need any tools.
Step 1
Start at the top of the wall and locate a seam between two strips. Gently lift the corner of the strip away from the wall.
Step 2
Grasp the strip with one hand on each side and slowly and evenly pull the strip down from the ceiling to the floor. Pull the strip at about a 45° angle toward the floor. Repeat until all the strips are removed.
